Xactimate _®  2002 System Requirements

• Xactimate Stand-Alone Computers
  • Windows 98/2000/XP (All 32-bit Versions) or Windows NT 4.0 service pack 6 or higher
  • 800 MHz or higher processor recommended (400 MHz minimum supported; may limit performance and some features).
  • 192 MB of RAM recommended (64 MB minimum supported; may limit performance and some features).
  • 500 MB of available hard drive space (620 MB with all electronic tutorials installed). Additional hard drive space required will depend on the quantity and complexity of your saved estimates. If your hard drive is too full, performance will suffer.
  • 12X CD-ROM drive recommended (4X minimum supported).
  • SVGA color monitor with resolution set at least at 1024x768 recommended* (800x600 minimum supported).
  • High speed internet connection (DSL, cable, ISDN, T-1, etc) recommended (56K modem minimum supported).
  • Internet access through an Internet Service Provider (ISP).
  • Full rights to the network's Xactware Folder.
  • 100Base-T hub (100 Base -T switch recommended).
  • Category 5 Unshielded Twisted-Pair (UTP) cable throughout your network.
  
  
• Network Installation
  Important Peer-to-peer networking does NOT meet our requirements.
  Only networks with a dedicated true file server meet our requirements. Required network software includes Novell Netware 5.0 (5.1 recommended), Windows NT Server 4.0 (service pack 6 or higher) or Windows 2000 Advanced Server.
  We cannot provide technical support for peer-to-peer environments or other network environments that do not meet our requirements.
  
  Do not mix client drivers. Choose either Novell Client 32 (version 3.3 or higher) or Microsoft's built-in clients (do not use Microsoft's Novell clients-Novell networks require Novell client software). Use the same driver on every workstation. • Your server must be at least a Pentium III-866 with at least 256 MB of RAM (512 MB recommended) and 800 MB of available hard drive space. (If you plan on running Xactware 2001 on the server as well, you will need one GB on its hard drive.) Please refer to the attached diagram for further details. If you have additional questions concerning your particular file server, please contact our Technical Support Team for clarification.
  • Each and every computer on which Xactware 2001 is installed must meet all of the system requirements listed in "Stand-Alone or Network Workstation Installation" on the previous page.
  • Your network hardware must be 100Base-T with Category 5 Unshielded Twisted-Pair (UTP) cable throughout (all network connections).
  • At least one of the computers on the network needs to have Internet access.
  • Never install Xactware 2001 to the root directory of a drive. Always create a subdirectory or folder to install to. We suggest that you install to the default path of X:\Xactware (where X: is the shared network drive).
  • Always use the same network data path for both the network install and each workstation install. For example, if you use the path X:\Xactware for the network install, be sure to use the exact same path as you install to the different workstations.
  
  The 2002 Install/Update process will check your computer for compliance with the above system requirements. Computers not meeting the minimum supported requirements will not be allowed to proceed with the Install/Update process.
  
  Click here to see a graphical overview and additional details on these requirements.